Logging semi-trailer PL-9 and its modifications

Logging semi-trailer PL-9 and its modifications

Logging semi-trailer PL-9 and its modifications

Description

Logging semi-trailer PL-9 is designed for collection and transportation of assortments from 1 to 6 meters long to the loading platforms or directly to the consumer. It is necessary to install additional racks, supplied separately, for transportation assortments with a length of 1 m.

The semi-trailer is designed to work in conditions of flat and rugged terrain. 

More
Specifications
Type Single-axle four-wheel semi-trailer of frame construction
Model PL-9 PL-9-03
Nominal load capacity, kg 9 000 11 000

Show detailed specifications
Operating weight, kg 4100 (±100) 4120 (±100)
Overall dimensions, mm:  
- length 7210 (±200) 7210 (±200)
- width 2225 (±100) 2225 (±100)
- height 3200 (±100) 3300 (±100)
Gauge size, mm 1800 (±50)
Ground clearance, mm 350 (±20)
Estimated length of transported assortments, m 1, 2, 4, 6*
Maximum vertical load from the semi-trailer, attributable to the energy vehicle hitch, kN 14
Maximum average specific pressure of the semi-trailer wheels on the ground, kPa 210
Overcoming obstacles and maneuverability (with an energy vehicle):
The highest permissible speeds km/h:
- on roads with asphalt concrete or equivalent surface 25
- on forest roads 10
Angle of ascent and descent:
- unloaded 18º
- loaded (up/down) 8º/12º
- the largest lateral roll angle
Brake system air pressure, MPa from 0,65 to 0,80
(provided by power vehicle)
Tires 16,5/70-18
Air pressure in tires , MPa 0,37 (±0,01)
Hydromanipulator GМ-42 GМ-42Т
- control From the workplace of the energy vehicle operator
- working device Pincer gripper for logs
- swivel mechanism of working device Hydraulic rotator
- structural weight 1250 (±50) 855 (±50)
- maximum load moment, kN-m 42
- maximum load moment excluding rotator and gripper kN-m 31 34
- permissible load capacity at maximum outreach, kg 460 430
- maximum boom extension, m 5,5 6,5
Angle of rotation:  
- boom in the horizontal plane 380º
- rotator Unlimited
- maximum torque of the hydraulic manipulator column in the horizontal plane kN-m 9,0
- maximum cross-sectional area of the pincer gripper m2 0,16
- operating parameters of the hydraulic system:
Nominal pressure, MPa
16 20
Working fluid flow rate when operating the hydraulic manipulator, l/min from 25 to 50
Tank volume, dm3 65 (±3)
* Supplied to customer's order