BK-205D drill and crane machine
BK-205D drill and crane machine
Description
Drilling machine BK-205D can be used for drilling and installation of supports during the construction of power lines and communication lines, repair and maintenance of power lines.
The machine is also used for leveling small construction sites; backfilling trenches and pits; loading and transporting loose materials over short distances.
Specifications
| Basic chassis | Tractor «BELARUS» 92P |
| Maximum drilling depth, m | 3 |
| Drilling diameter, m | 0,36 - 0,80 |
| Drilling method | Cyclic |
Show detailed specifications
| Drilling angle, degrees | 60o−102o |
| Maximum torque on the drilling tool, Nm | 5900 |
| Design maximum axial load on the drilling tool while pulling out, kN | 31,65 |
| Drill feed drive type | Hydraulic |
| Drill tool rotation drive type | Hydraulic |
| Type of crane equipment drive | Hydraulic |
| Drill tool rotation speed, rpm | (at engine speed 1400 rpm), parameter 35...153 |
| Maximum lifting capacity of crane equipment, kg | 1400 |
| Maximum lifting capacity of loader (PFS-0.75), kg | 750 |
| Maximum lifting height of the load hook, m | 7 |
| Technical capacity (when drilling 0.5 m diameter wells to a depth of 3 m in non-frozen soils of category III), m/h | 15 |
| Dimensions on the tractor in mm, and transport characteristics: | |
| Overall dimensions in transport position, mm | |
| — length | 7400 |
| — width | 2100 |
| — height | 3990 |
| Overall dimensions in operating position, mm | |
| — length | 7400 |
| — width | 2100 |
| — height | 7500 |
| Overcoming slope in transport position, degrees | |
| - longitudinal | 15 |
| - cross-sectional | 12 |
| Total weight, kg | 6400 |