Special assembly elevator OPT-9195
Special assembly elevator OPT-9195
Description
Special assembly elevator OPT-9195 is designed for loading-unloading, assembly and transportation works at the objects of municipal and road economy, construction sites, forestry and energy sectors. The elevator can be used for maintenance of lighting systems, maintenance of green and ornamental plantings, loading-unloading operations, installation works for maintenance of buildings and structures, light leveling works, performance of forest maintenance and harvesting works, installation and maintenance of power lines and lighting systems.
Specifications
Energy vehicle | «BELARUS» 920 |
Load capacity on outriggers, kg: | |
- at minimum outreach | 2250 (±50) |
- at maximum outreach | 300 (±15) |
Show detailed specifications
Cradle load capacity, kg | 120 |
Maximum outreach, mm | 7800 |
Max. height of hook lift, m, not more | 8,9 |
Load moment, kNm | 49 |
Angle of boom rotation in the horizontal plane | 300°(+10º) |
Angle of rotation of the boom in the horizontal plane with limit switch locked |
400° |
Lifting and lowering speed of hook block without load, m/min | 8,0 |
Rotation speed of the column, rpm | |
- the lowest | 0,5 |
- the highest | 1,7 |
Transport speed on the horizontal section of paved road, km/h | 15 |
Number of service personnel, persons | 1 |
Number of seats in the cradle | 1 or 2* |
Boom rotation, extension and tilt drive | hydraulic |
Overall dimensions of the elevator in transport position, mm: | |
length with cradle | 7190 |
width | 2400 |
height | 3300 |
Elevator weight without a cradle, kg | 6400 |
The weight of the elevator with a cradle, kg | 6600 |
Maximum depth of lowering hook, mm | 1500 |
Requirements for the site on which the hoist is allowed to work with the load: | |
- ground pressure (specific), MPa (kgf/cm2) | 0,56 (5,7) |
- angle of slope, no more | 3° |
Time of full change of outreach, s | 24 |
Quantity of oil in hydraulic system, l | 39 |
Nominal pressure in hydraulic system, MPa | 14,5 |
Maximum pressure in hydraulic system, MPa | 16,5 |
Filling capacity of tank, l | 16 |
Special installation elevator "Belarus" OPT-9195 is equipped with: | |
- a system that follows the orientation of the cradle in the vertical position | |
- locking system for blocking the lift and rotation of the boom when the elevator is not installed on the supports | |
- interlocked device for lifting of the supports in the working position of the boom | |
- a system of emergency cradle lowering in case of failure of the hydraulic system or the engine of the base machine | |
- a device which prevents the outriggers from extending by themselves when the elevator is in motion | |
- emergency engine stop system and cradle-operated horn button | |
- cradle with insulators for work on power lines up to 1000 V with "Barrier 1M" protective system | |
* Supplied to customer's order |